How To Make Dust Meter | DIY Dust Monitor | Arduino Project | SekhoHub |

Hi friends in this Project I’m going to make dust meter using Arduino so without further let’s start this Project.

Materials for the Project.

• 1 X Arduino Uno
• 1x 16×2 LCD
•  1X Dust sensor
•  1X 5V Power Supply
•  JUMPER WIRES
  

  ---

Let’s see the connections of the project.

1.  First, connect Arduino.
   

   ---

2. Then connect that LCD display and connect its VCC pin to the fivefold pin of Arduino, its ground pin to ground, its SDA pin to the A4 pin of Arduino, and its pin to the A5 pin of Arduino.
   

   ---

3. Now connect the sensor and connect its VCC pin to the 5 pin of Arduino, its ground pin to ground, its LED pin to the D2 pin of Arduino, and its out pin to a zero pin of Arduino.
   

   ---

   So these are all the connections; now let’s upload the code to Arduino.

   

    

   So that’s it for today’s project. I hope you have enjoyed this

   Project for more Project like that, stay tuned, and I will see you in the next project.

   | Test the project |