How To Make Variable Lab Bench Power Supply [0 to 24 Volts And 6 Amperes Current] | Sekhohub.online

Hi friends, I’m going to make a variable bench power supply; its output can be set at 0 to 24 volts, and it can supply up to 6 amperes of current. I hope you learn something from this post. Please like and share.

Materials for the Project.

1. 1x LM723 IC
2.  2x 2N3055 TRANSISTOR
3.  1x D313 TRANSISTOR
4. 4x 10A10 DIODES 
5. 4x 1N4007 DIODES 
6. 1x 100 nF CAPACITOR 
7. 1x 10uF CAPACITOR 
8. 1x 100uF CAPACITOR 
9. 1x 1000uF CAPACITOR 
10. 1x 1K VARIABLE RESISTOR 
11. 1x 10K VARIABLE RESISTOR 
12. 1x 470 OHM RESISTOR 
13. 2x 680 OHM RESISTORS 
14. 1x 1K RESISTOR 
15. 1x 2.2K RESISTOR 
16. 1x 4.7 K RESISTOR
17. 2x 2-PIN TERMINAL BLOCKS 
18. DIGITAL VOLT AMPERE METER
19. TRANSFORMER HEAT SINK
20. VERO BOARD
21. JUMPER WIRES

Circuit Diagram